Uptown Audio

  NAD

Stereo Power Amplifier

C272

2 x 150W Minimum Continuous Power into 4/8 ohms
220W, 340W, 460W IHF Dynamic Power into 8, 4 and 2 ohms, respectively
PowerDrive™
High Current Holmgren™ Toroidal Power Transformer
Bridgeable to 300W mono (8 ohms)
Both fixed and variable inputs, switch selectable
Double set of loudspeaker binding posts to facilitate bi-wiring
All Discrete Circuitry
Gold plated RCA Connectors
NAD Soft Clipping™
12V Trigger Input for remote Stand-by/On switching
IEC Detachable Power Cable
ATO Logic

 

Stereo Preamplifier


C162

6 line level inputs incl. 2 Tape in/outputs with dubbing facility
2 line level preamp outputs; one is variable from 0dB to Ð12dB
Switchable MM and MC phono input
Gold plated in and output sockets
Pure "Class A" discrete amplifier modules
Independent headphone amplifier
Bass & Treble control with Tone Defeat switch
Full Remote Control
"Blue Velvet" Alps motorized volume control
NAD Link
Input switching through hermetically sealed relays
12V trigger

 

PP-2 Phonostage

• Low Noise, Wide Band MM phono stage • External 15V power supply • Gold Plated RCA connectors • Gentle subsonic filter minimizes rumble • High quality lead with Gold Plated RCA plugs • LED power indicator • Metal case provides shielding from outside interference

 
NAD has for decades been known for producing very high quality amplifiers with superior sound quality. The legendary NAD 3020 amplifier sold more units than any other ever produced. Simple yet elegant styling, sturdy construction and more capable amplifier sections have given NAD the edge for over 30 years. This same attention to detail and emphasis on quality has resulted in an exceptional line of modern stereo amplifiers. Use of the finest materials and straight-forward engineering has culminated in continued NAD quality audio performance from their new line of amplifiers featuring unique NAD circuit designs such as Power Drive and Soft Clipping to allow performance unobtainable from lesser brands. The awesomely powerful 218THX amplifier has a huge and warm sound with finesse and control for even the most difficult loudspeakers. Effortless reproduction of dynamic levels and retention of instruments natural timbre are evident. The newly redesigned C160 preamp improves upon the classic value and performance of its predecessors with lower noise and remote control.

Audition NAD with PowerDrive™.

 

New home theater separates from NAD

T163 Preamp/processor

DDolby Digital EX, Dolby Digital, ProLogic II, DTS, DTS ES, DTS NEO:6, Matrix 7.1, EARS, Stereo Enhanced Surround Modes
HDCD Decoding, Stereo Bypass
192kHz/24 bit DACs for all channels
6 Video Inputs all S-Video and Composite, 2 tape loops
HDTV Compatible Component Video on 3 Inputs and 1 Output
3 Audio Inputs, 1 Tape Loop
6 Digital Inputs, 4 Coaxial, 2 TOS Link freely assignable
2 Digital Outputs, 1 Coaxial, 1 TOS Link
7.1 Analogue Input
Analogue input levels are adjustable for best S/N ratio
Pre-amp Outputs employ discrete component buffer amps for ultra-low output impedance
   and high current drive
Zone 2 A/V PreOut with independent source and volume
RS-232 port interface for advanced control systems and software upgrades
Firmware upgradeable via RS-232 port
3 x 12V Trigger Outputs, 12V Trigger Input
IR Input, 3 x IR Output
All Inputs can be renamed, and preferred surround mode is saved to input location
5 Custom Scenario Presets store unique speaker setting (Bass Management) surround mode and tone control settings for instant recall
HTR-2 - 8 Device Illuminated Learning Remote with Macro function
ZR-2 Remote with unique Zone 2 commands

 

T973 Seven Channel Power Amplifier

7 x 140W Minimum Continuous Power (8 / 4 Ohms); all channels driven simultaneously
2 x 200W Continuous Power (8 / 4 Ohms)
230W, 390W and 450W IHF Power into 8, 4 and 2 ohms, respectively
Mono-block, Modular construction
Differential, Class A input circuit topology
High Current Holmgren™ Toroidal Power Transformer
Input gain control for each individual channel
Gold Plated RCA Inputs
NAD Soft Clipping™
12V Trigger for automated ON/OFF operation

 

 

Equipment     Email